The vertical Wall Garden is a high-quality wall garden unit, featuring a 74.5cm length and 12.6cm depth container that holds 90mm x 90mm standard garden pots. It can be installed with as many layers as required to create a customized wall garden, and simply attaches to walls or fences.
With a down flow waterway design, water runs from the top module down through the lower units and each unit retains water to continue to provide moisture to the plants reducing how often watering is required.
It’s simple to install a drip watering system for efficient water usage or you can simply water with a standard hose. Each tier module contains 7 pots and it comes with windproof clips to hold plants in place.
We use and recommend this system for propagating seeds and for seedlings as well as flowers, herbs and vegetables. It is built with food grade polypropylene and extremely strong with braces between each pot that also hold pots in place.
When growing herbs and vegetables the advantage of this system is that you can simply remove the plant you want to use, trim or eat and replace it when finished or as plants fade out and die off at varying cycles you can simply reinstall a single plant without disturbing all plants and their root systems.
To install on a standard timber fence simply install 2 vertical studs approximately 500mm apart to your fence rails with screws and then starting at the lowest planter, attach to the studs with 2 standard timber roofing screws at 500mm centres. Once the first planter is installed, check for level simply add the next unit using the locating tabs and screw.
For Brick walls units can be screwed directly to the wall or studs can be attached to the wall and then planters fixed to studs.
This is an imported product, not designed by Verti Gro Australia at this time.